ELTRON TLP 3642 DRIVER

Gap Sensing and Black Line Sensing. Appendix C The Windows printer driver provides control of several printer features when printing from Using The Windows software applications. Table of Contents Add to my manuals Add. Don’t show me this message again. Operation Step Open the Print Carriage. You have no items in your shopping cart. The tape will be used to attach the leader to the take-up roll.

Uploader: Tauzahn
Date Added: 10 March 2017
File Size: 18.14 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 22895
Price: Free* [*Free Regsitration Required]

Page 31 Operation Step Tap the feed control until the ribbon advances to the black area. LpTlpTlp Gap Sensing and Black Line Sensing. Loading Labels Or Tags Operation Loading Labels Your printer can print on adhesive backed la- or Tags bels, non-adhesive tags or continuous non- adhesive paper. Insert the end of the roll into the feed slot and through the Label Guides.

Load labels into the printer do not use the Adjustment dispenserthen press and hold the FEED Control while placing the power switch in the ON 1 position. While every effort has been made to keep the information contained within current and accurate as of the date of publication, no guarantee is given or implied that the document is error-free or that it is ac- curate with regard to any specification.

Page 27 Operation Step Loosen the tape that secures the leader on the new transfer ribbon.

  IP5200 WINDOWS 7 DRIVER DOWNLOAD

TLP 3842 Desktop Printer Support

You must have JavaScript enabled in your browser to utilize the functionality of this website. Insufficient memory for label size. Page 30 Operation Step Close the print carriage and press down firmly at both arrows to lock.

Operation Loading Transfer Transfer ribbons are used when printing on Ribbons thermal transfer adhesive labels or non- eltrno tags. Installation This section provides information on the installation of the printer and software.

The ribbon does not follow the same path as the labels. Operation Step Tap the feed control until the ribbon advances to the black area.

Perform the AutoSense gap sensor adjust- ment. Using scissors, cut the transfer ribbon just below the take-up roll.

Table of Contents Add to my manuals Add. Operation Loading Labels Your printer can print on adhesive backed la- or Tags bels, non-adhesive tags or continuous non- adhesive paper. Page 29 Operation Step Open the print carriage and pull the ribbon leader forward towards the front of the print carriage and attach to the take-up roll with ad- hesive tl.

The first troubleshooting reference source is Resources the table on the previous page. Loading either labels or tags is easy, however the feed direction of each roll is different.

If print looks Print Density faded when printing at high speed, eltronn a higher darkness number for the Print Quality setting. Page 20 Operation Step Turn the green wheel to adjust the Label Guides to match the width of the roll. Operation Step Install the ribbon on the rear supply spindle so that the ribbon feeds from the top of the roll into the ribbon feed slot.

  ASUS P4PE-X TE SES DRIVER

Operation Step Close and lock the Print Carriage. For the name of a dealer in your area, call 1 Perform AutoSense gap sensor adjust- ment. Step Perform steps of the Loading Labels proce- dure.

Skip to Eltrn Area: Copyright Notice Eltron International Incorporated and may not be duplicated in full or in part by any person without written approval from Eltron.

Comments to this Manuals Your Name.

Eltron TLP Printer – Best Price Available Online – Save Now

Installation Installation The following steps will guide you through the installation of the printer and software. Don’t show me this message again.

Troubleshooting EPL Programming manual. We detected that your JavaScript seem to be disabled. Page 28 Operation Step Install the ribbon on the rear supply spindle so that the ribbon feeds from the top of the roll into the ribbon feed slot.