To choose a processor, you need to consider the performance requirements of the system and the price of the processor. Boot Up Floppy Seek Default: The information in this document is subject to change without. How to Set Jumpers A jumper consists of two or more pins mounted on the mainboard. Self-Monitoring, Analysis, and Reporting Technology system is a diagnostics technology that monitors and predicts device performance. The main menu of the Setup Utility shows a list of the options that are available.
|Date Added:||11 March 2018|
|File Size:||41.29 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
ECS K7VZA – motherboard – ATX – Slot A – KT133
Connecting Internal Components After you have installed the mainboard into the system case, connect the power cable from the case power supply unit to the mainboard power connector ATX1. Preparing The Mainboard Preparing the Mainboard Mainboard Guide Use the following illustration k7gza key to identify the components on your mainboard.
Making External Connections After you have installed the mainboard, make the connections to the external ports.
Click Cancel if you do not want to install drivers at this time. Installing A Floppy Diskette Drive Installing a Floppy Diskette Drive The mainboard has a floppy diskette drive sounx and it ships with a diskette drive ribbon cable that supports one or two floppy diskette drives. Audio Software This folder has software and drivers for the sound system that is integrated on this mainboard.
The mainboard identification is located in the upper left-hand corner. After clicking OKthe install Wizard will start. Ensure too that you are installing the mainboard into a suitable case.
ECS K7VZA Manual
Checklist This chapter contains the following information: TX, RX inverting enable Default: When the installation is complete, remove the floppy diskette from the diskette drive and restart your computer.
Before You Begin Before you begin to install your mainboard, take care not to m7vza the product from static electricity.
This setting has to match the requirements of the infrared module used in the system. You can make modifications to most of these items without introducing fatal errors to your system. By pressing ‘print’ button you will print only current page.
PC Health Status Option On mainboards that support hardware monitoring, this item lets you monitor the parameters for critical voltages, critical temperatures, and fan speeds. Check the Jumper Settings Check the mainboard jumpers to ensure that the mainboard is configured correctly. Note that the page has a scroll-bar to scroll down to more items. Frequency Control Option This item enables you to set the clock speed and system bus for your system. Resources Controlled By Default: Making External Connections Making External Connections After you have installed the mainboard, make the connections to the external ports.
Standard Cmos Features Option 8.
Drivers and software for the built-in IDE. Page 64 Wake Up Events This item opens a submenu that enables you to set events that will resume the system from a power saving mode.
Although the values are not predefined, red usually indicates STR and green indicates normal.
Install the Memory Modules For this mainboard, you must use pin 3. Page of 84 Go. How to Set Jumpers A jumper consists of two or more pins mounted on the mainboard. Page 67 Resources Controlled By Default: Follow the instructions on the screen to install the driver. To sounr the CMOS memory, turn off the system, disconnect the power cable from the mainboard, and short the appropriate pins for a few seconds.
ECS > K7VZA (V)
The clock speed and system bus are determined by the kind of processor you have installed in your system. Enabled The chipset has an embedded 32 -bit posted write buffer to support External Connector Color Coding To help identify the external connectors, many connectors now use standard colors as shown in the table below.
A Supervisor password takes precedence over a User password, and the Supervisor can limit the activities of a User. Before attempting to configure a hard disk drive, make sure you have the configuration information supplied by the manufacturer of your hard drive.