IBM VXA-2 SCSI SEQUENTIAL DEVICE DRIVER

If you cannot locate your xSeries server user manual, follow the instructions in the following sections to install the tape drive. In case IBM or your reseller is unable to repair an IBM Machine, you can alternatively ask for a partial refund as far as justified by the reduced value of the unrepaired Machine or ask for a cancellation of the respective agreement for such Machine and get your money refunded. However, if there is insufficient working space to attach the connectors after mounting the drive, attach the cables first. Each time the cartridge is used, mark one of the boxes on the label with a pen or marker. IBM is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment. Loading the cleaning cartridge After the cleaning cartridge has been inserted, the remainder of the cleaning process is automatic. For the support telephone number and support hours by country, refer to the following table.

Uploader: Taum
Date Added: 13 October 2009
File Size: 20.67 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 23791
Price: Free* [*Free Regsitration Required]

Page 19 Table Data grade tape media is the only type of tape media that should be used for backup and data processing. Always try cleaning the drive before you assume the cartridge is bad. Specification Tape drive Height Additional support offerings, including step-by-step installation assistance, are available for a sequebtial fee.

Loading the cleaning cartridge After the cleaning cartridge has been inserted, the remainder of the cleaning process is automatic. Response time may vary depending on the number and nature of the calls received.

  GF6200 TC DRIVER DOWNLOAD

IBM VXA-2 – TAPE DRIVE – VXATAPE USER MANUAL Pdf Download.

For a list of supported servers go to http: To order cartridges in other locations, contact your local provider of IBM storage products. Comments to this Manuals Your Name. The following is added to this Section: The IBM cleaning cartridge is shipped with a label on it that has 20 boxes that are designed to be used to log the use of the cartridge.

Recommendations for data cartridge usage The following list describes recommended guidelines that will help to protect your data and prolong the life of your tape cartridges and the tape drive: Using The Tape Drive This section provides information on using the tape drive.

Setting the write-protect switch Resetting the drive To reset the VXA-2 drive, perform one of the following steps: In solch einem FA11 ist der Abstand bzw. Tape drive conditions Table B-3 summarizes the environmental requirements for the tape path in the tape drive. Consult an IBM authorized dealer or service representative for help. Loading Data Cartridges The IBM cleaning cartridge is shipped with a label on it that has 20 boxes that are designed to be used to log the use of the cartridge.

Exabyte VXA-2 Packet Tape Drive with FireWire Free Driver Download (Official)

Mounting the drive Generally, you will mount the tape drive and then attach the SCSI and power cables. The following replaces this Section: Don’t show me this message again. Slide the drive ibk the server bay or external enclosure. The cartridge will be removed and returned to you. European Union – emission directive Sccsi The Drive Figure Page 34 The cartridge will be removed and returned to you.

  DESKJET 6127 NETWORK DRIVER

Don’t have an account? Problem Solving If, after attempting the recommended actions listed in the table, the problem still exists or recurs, a hardware failure might be the cause.

Maintaining The Tape Drive Do not attempt to use other types of cartridges, or you may damage the tape drive. Figure shows the front panel of the tape drive and identifies the components. Page 38 For the support telephone number and support hours by country, refer to the following table. Slide the cartridge into the opening on the front of the tape drive see figure Figure until the loading mechanism pulls the cartridge into the drive and the drive door closes.

Completing the installation and turning on the device Before completing the installation, check your work to ensure that the power and SCSI connectors are securely attached, and that the cables are properly routed.

IBM can not accept responsibility dwvice any failure to satisfy the protection requirements resulting from a non-recommended modification of the product, including the fitting of non-IBM option cards. Page 56 Part Number: If it is absolutely mandatory that the cartridge be removed before returning the drive for repair, contact IBM technical support.