In our case, we’ll choose ” New Configuration ” and then click on ‘ Next ‘. Repeat this for the second ” UG ” drive. You are warned that this will erase any existing arrays. This page has been accessed 49, times. This process destroys any and all existing data on the array.
|Date Added:||9 June 2010|
|File Size:||32.5 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
This is a new array and there is fujjtsu existing configuration, fkjitsu both ” New Configuration ” and ” Add Configuration ” will do the same thing. However, should new drives be added in the future and a second array created, this will prevent problems.
Here we see a controller with eight If you get an error saying ” Must wait for current operation to complete “, then don’t worry about setting the boot device. In our case, we have only one array, so functionally there is no difference. The difference is that, if there was an existing array, ” New Configuration ” would delete it where ” Add Configuration ” would let you build a second or third or You are warned that this tc100 erase any existing arrays.
Fujitsu Server RAID configuration steps |Virtualcloudz
The provides a significant performance boost, but it fujitsi only safe to use when the flash unit is working. We could have allocated a hot-spare during the assembly of the array above, but in my case, I want two hot spares.
The ” Create Virtual Drive ” option is already selected.
Press ‘ ‘ to select and unselect each drive, and the ‘ ‘ up and ‘ ‘ down keys to navigate the available disks.
A “hot spare” is a drive physically in a node that is configured to automatically replace a drive that is in an array that fails.
Now all the drives will be shown in the right-side ” Drive Groups ” window. Please note, we are going to create a RAID level 6 array with two hot-spare drives. We’re mirroring our data across two nodes though, so we can live a little more dangerously and select RAID level 5.
This is not designed to be an extensive tutorial. You may well be creating a different configuration. The page will reload but now the ” Accept DG ” button is gone, which is good.
Fujitsu PRIMERGY TX100 S3 Operating Manual: Configuring The Sas/sata Raid Controller
This is because, after the initial initialization is complete, a full background initialization is fujutsu. Highlight one of the ” UG ” disks to open the ” Operations ” menu.
We have a Flash Backup module on our controller that allows us to safely use write-back caching.
The controller, being ever diligent and terrifying, will warn you about the risks of using write-back caching only when the BBU is healthy. Views Read View source View history. Click on ‘ Exit ‘, then click ‘ Yes ‘ and then reboot your machine.
Fujitsu PRIMERGY TX S3 RAID – Fujitsu Support Forum
As much as we’d not want to lose performance, this is fx100 only safe option. A global hot spare can then be allocated to any array on the node. Please adapt as necessary. This process destroys any and all existing data on the array.
Retrieved from ” https: Shortly after returning to the main menu, daid window will pop up telling you that fujitzu initialization has completed.
The former is used on the Mx generations and the later from the Sx generation servers. We need to first create a ” Drive group “, which is the set of drives we want to assemble into an array. After the warning, it takes fumitsu back to the ” Virtual Drive Definition ” window, but now we see our new array in the right-side ” Virtual Drives ” window.
Never one to miss an opportunity to ask a question; We’re asked if we want to save the configuration. We’re going to use all disks to create a single RAID level 5 array.
We only have one array, so this step is arguably not needed. If this was a single-server setup, that would be perfectly sensible.