The missing parts could be due to the drawing, make sure your lines are all hairlines and rgb red – not sure that’s what the Epilog driver needs, but it’s what my GCC uses. The time now is 1: It could be the table being out of level but I doubt it. It’s dependent on the design file and is not random within that design. So – I would start with a good cleaning of the optics, all mirrors and the lens.
|Date Added:||22 May 2005|
|File Size:||15.46 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Drop-down menus provide user control of all laser settings, calibration, and special features. In regards to your banding, there are a few things that could be causing this to occur but before we can determine the cause, we need to be absolutely sure we know dpilog what we are dealing with. So – I would start with a good cleaning of the optics, all mirrors and the lens.
Rolling buffer allows files of any size 32 MB and larger to be engraved. Drop-down menus provide user control of all laser settings, calibration, and special features.
Store unlimited files up to 32 MB. It’s dependent on the design file and is not random within that design.
It’s running fine but we’re having issues with vector cutting. The max power draw will be dependent on the wattage of the laser. Laser Marking – how can you affordably mark metal parts with barcodes and logos? These are pretty durable epolog as well as user friendly. He talked me through several trouble-shooting operations.
Epilog Legend 32EX Laser Upgrade
Call epilog support, they will run through the easy fixes first it’s best to start there, you wouldn’t want to replace the laser first, to find out it was a sticky belt. The ovals with wavy edges sound like they could be the encoder, it probably needs cleaning. 3e2x
Your mirrors are not sending the beam directly epilo the center of the lens and it comes out at an angle. Let us know if you have any further questions and we’ll go from there.
Epilog has improved thier instructions for alignment over the years, now it takes about a half hour or so epiog you’ve done it once. I think I’m going to purchase a power conditioner. Epilog Legend 32ex problems From: Vector color mapping links speed and power settings to any RGB color. We’ll probably be having a tech come and align the machine for us soon.
Technical specifications of our Legend 32EX. Resolution User controlled from to dpi. Did you call Epilog tech support yet? We recently purchased a year old Epilog Legend 32EX W from out local distributors it was a screaming good deal, and gives us the size and power we wanted but couldn’t afford new.
All times epilig GMT I have done so much with so little for so long, that I can do almost anything with practically nothing The missing parts could be due to the drawing, make sure your lines are all hairlines and rgb red – not sure that’s what the Epilog driver needs, but it’s what my GCC uses.
The angled cuts are an alignment problem. Laser Cutting – nothing compares to the quality of a laser cut on many materials. Saws – Radial Arm, Legedn.
EPILOG LASER Legend 32EX for sale (used, price) # > buy from CAE
Join Date Jul Location St. I had banding on my ep 24tt, the eventual fix was to replace the tube. If you’re mostly doing nameplates and rastering acrylics and plastics then the A power is probably what you’re getting. If I have a line with some width or slightly off rgb red then it letend cut. Next I would do a thorough alignment.