Configuring device index 1 Info Please note that this is purely provided as an example. At first the FPGA has to be loaded with the configuration file. If an Ethernet cable is connected a simple web-site can be visited at the boards IP address. After downloading the archive unpack it: Registered tcp transport module. If you want to contibute to this project feel free to do so.
|Date Added:||6 September 2010|
|File Size:||49.93 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Total CPU time on all processors: Booting to single user mode BusyBox v1. Change into the package directory and configure the FPGA:.
Getting started with the Altera BeMicro SDK on Linux
If an Ethernet cable is connected a simple web-site can be visited at the boards IP address. Please refer to the following for more bemjcro Git Server. Registered protocol family 2 IP route cache hash table entries: Verbose stalled-CPUs detection is disabled. DLL in Visual Studio debuggen. To run the design, please follow these steps.
aFPGA: BeMicro SDK #2
Successfully performed operation s Info A license is required to recompile the design, however I have provided a precompiled SOF with the project. The hardware project for this system is also provided in the NiosII Linux git repo via board.
Retrieved from ” https: Below is a screenshot of the added TLB memory with procesor interface. At first the FPGA has to be loaded with the configuration file.
The direct download of the package is available here. You may experience intermittent JTAG communication nios2-terminal: After downloading the archive unpack it: In order to use the Altera tools some preparation in the shell must be made. Please choose an ip address appropriate to your network. The Linux prompt will appear bemicgo the boot messages.
To bring up the ethernet interface, type “ifconfig eth0 Registered protocol family 1 RPC: The software part of the package contains liinux Linux kernel that is bundled with an inital ram file system initramfs.
Views Page Discussion View source History.
You are free to use this design in any way you like. The nios2-configure-sof command found in the path added above in the PATH environment variable will pick the only one sof-file in the directory, choose the single available programmer give the right one by a parameter if several bemicr available and configure the FPGA. Ok, booting the kernel.
Quartus II bit Programmer was successful.
Linux on a BeMicro SDK – Altera Wiki
The second command nios2-terminal will start a new JTAG- terminal immediately after finishing the download. A precompiled image is provided with the files in the download section. After downloading the archive unpack it:. This allows to read all the messages from the booting Linux kernel: This can be downloaded by another special tool nios2-download.
Linux Development Boards and Kits Qsys. Please note that this is purely provided as an example.
The default system does start telnet.